Photo Gallery  

   

Video Gallery  

   

Who's Online  

We have 88 guests and no members online

   

counter customizable free hit

Plexiglas train fencing

I believe in using Plexiglas to save your locomotives and cars from the 5 foot smash to the floor. Here is how I have done it.

Procuring

1/8th inch Plexiglas is sold at Lowes and Home Depot in my area under the name of acrylic sheeting. It comes in various sizes, minimum I have seen is something like 1' x 2'. I try to get the 2' x 4' pieces. I don't buy the tempered kind.

Approach

I have a lined all of my track near a table's edge with either Plexiglas or Masonite strips. I use the Masonite in places where the transparency is not required. My strips are 1.5" tall and I use #4 x 1/2 screws to attach it. I know, 1.5 inches is not tall enough you say, well I had to be convinced too. Make them 6" for all I care, just know that I find the 1.5 inch height is just about perfect. :)

Cutting

I have tried to cut this stuff with my radial arm saw, band saw, chop saw, hack saw, saber saw and near killed myself with some of these methods. Then I tried scoring and snapping. None of these methods worked, all I got was cracked, chipped and scrap.

Then I tried my table saw. Set the blade at just the thickness of the sheet being cut. I use a standard ripping blade, have never tried any other except that one. I get a good cut using this approach. I then use my stationary belt sander with a 60 grit belt to take off the sharp edges. Wear your safety glasses, make sure ALL of your saw guards are in place, blade sharp and use a push stick.

Drilling holes

I use a sharp 1/8 drill bit to drill the holes in the edge for the screws. I make up 5 or 10 strips at the same time and it is easier to drill 5 or 10 stacked pieces at once than singularly, it is when the bit breaks through that last piece that you can have problems with splitting.

Interestingly, I have had my fencing up for about 7 months. Of course I have a couple of areas where I didn't think I needed it, locomotives have way of finding the areas where my fences are missing. Oh, how I hate to see a $300 locomotive go crashing to the floor.

I am sold on this approach!

My friend John Parker uses an open weave netting that he tacks to the underside of his layout frame. His idea works really well for him.

 

   

Downloads  

   
Copyright © 2017 Joe Daddy's Weblog. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.
© ALLROUNDER